Bizhub 222 Service Manual
Just got back into the copier/mfp repair after being away for 25 years. The company sent me to Ricoh training and then left me on my own. I have a K/M Bizhub 282 that needs the drum and developer replaced. I was told to open the right door, hit the counter/utility button, then enter 'stop,0,0,stop,0,1' and input all zero's when it called for a password. All it did was beep at me and it never got to the password screen.
I guess my instructions were wrong so I joined this site to see if anybody would help me out. The mechanical part looks easy but I don't know how to reset the counters. Copy quality issues or just calling for PC drum exchange? If the latter, go into service mode(utlity/counter button, detail, stop,0,0,stop,0,1 then all 0's and end) Go to software switch 418 change bit 3(the fartherst right '1') and change that to a 0. This shuts off the 'pc drum' message.
If it's copy quality, then. Go into service mode with door closed, counter, clear drum/dev counter. Shut off machine. Replace drum/developer Install drum into machine.
Konica Minolta Bizhub 222 Service Manual
Go back into service mode, check to make sure the counters reset(if they didn't.open right side door and clear counters again) Go into function and run F8. Wait for that to finish and test. That should do the trick.