The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations, ONYX Series products meet virtually every application requirement. The NFS-320’s modular design makes system planning easier.

• Notifier Fire Alarm Systems
• Notifier Nfw2 100 Installation Manual

Notifier Fire Alarm Systems

The panel can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block. Simply add additional peripheral equipment to suit the application. Wireless fire protection can be added with the SWIFT wireless gateway and devices. For installations using NFS-320C, an optional ACM Series annunciator can be mounted in the same cabinet (up to 48 zones/points, order separately; see DN-60085). NOTE: Unless called out with a version-specific “R”, “C” or “E” at the end of the part number, “NFS-320” refers to models NFS-320, NFS-320R, NFS-320C, and NFS-320E. Certified for seismic applications when used with the appropriate seismic mounting kit.

Approved for Marine applications when used with listed compatible equipment. See DN-60688. One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7. Up to 159 detectors and 159 modules per SLC; 318 devices maximum.

– Detectors can be any mix of ion, photo, thermal, or multisensor; wireless detectors are available for use with the FWSG. – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG. Optional FWSG Wireless SWIFT Gateway supports wireless SLC devices. Standard 80-character display. Network options: – High-speed network for up to 200 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA). – Standard network for up to 103 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP- 300/400, AFP-1010, and AM2020).

Up to 54 nodes when DVC-EM is used in network paging. 6.0 A power supply with four Class A/B built-in Notification Appliance Circuits (NAC).

Selectable System Sensor, Wheelock, or Gentex strobe synchronization. Built-in Alarm, Trouble, Security, and Supervisory relays. VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware. Autoprogramming and Walk Test reports.

Multiple central station communication options: – Standard UDACT – Internet – Acclimate® Plus™ – 0.5 to 4.0%/foot obscuration. – IntelliQuad – 1.0 to 4.0%/foot obscuration. – IntelliQuad™ PLUS – 1.0 to 4.0%/foot obscuration.

Drift compensation (U.S. Patent 5,764,142). Degraded mode — in the unlikely event that the NFS-320’s primary microprocessor fails, FlashScan detectors revert to degraded operation and can activate the control panel’s NAC circuits and alarm relay. Each of the four built-in panel circuits includes a Disable/Enable switch for this feature. Multi-detector algorithm involves nearby detectors in alarm decision (U.S.

Patent 5,627,515). Automatic detector sensitivity testing (NFPA-72 compliant). Maintenance alert (two levels). Self-optimizing pre-alarm. Service and support in: Ohio, Michigan, Indiana, Toledo, Sylvania, Oregon, Rossford, Perrysburg, Waterville, Wauseon, Adrian, Temperance, Monroe, Oak Harbor, Fremont, Bowling Green, Napoleon, Archbold, Delta, Hillsdale, Tiffin, Fostoria, Port Clinton. Sandusky Huron, Clyde, Bellevue, Norwalk, Willard, Shelby, Ashland, Mansfield, Lexington, Bucyrus, Ontario, Galion, Marion, Upper Sandusky, Carey, Findlay, North Baltimore, Kenton, Ada, Lima, Bluffton, Ottawa, Delphos, Defiance, Bryan, Montpelier, Coldwater, Angola, Auburn, Fort Wayne,Van Wert, Decatur.

The NFS-320 and NFS-320R (Same as NFS-320 but in red enclosure) intelligent fire alarm control panels are part of NOTIFIER's UL listed ONYX Series. It's designed specifically for small applications with features that minimize installation time, enable faster response times, and simplify maintenance and usability. Features & Benefits:. Fully field programmable. Removable chassis design for easy installation and service.

Direct connect to NOTIFIER FirstCommand™ Emergency Communications System. Networkable with NOTI-FIRE-NET and ONYXWorks compatible up to 200 nodes for NFN. Optional IP or GSM Communicator. Listings: Releasing, Mass Notification, Seismic Certified, Marine Approved. Signaling Line Circuits (SLCs): 1: Style 4, 6, or 7. Intelligent Devices: 318: (159 detectors/159 modules). Notification Appliance Circuits (NACs): 4 (built in): 1.5 amps ea.

Voice Evacuation Available: Yes, Direct integration with FirstCommand 50/100. With DVC when part of standard or high speed NOTI-FIRE-NET. Power: 6 amps total system power. Annunciators: 32 LCD type, 32 ACS type. Networkable: Yes, NOTI-FIRE-NET or High-Speed NOTI-FIRE-NET Listings:. UL Listed: S635. ULC Listed: S635 (NFS-320C only, excludes IPDACT).

FM Approved. CSFM: 7165-0028:0243. MEA: 128-07-E.

Notifier Nfw2 100 Installation Manual

Of New York: #6121. City of Chicago.